Description

XTC 3D is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC 3D cures to a hard impact resistant coating that can be sanded primed and painted.
Adding colors and metal effects is easy. Use with UV Resistant Pigment for XTC 3D (ASIN: B01BKSLHHK) to paint and seal at the same time!
Inexpensive to Use: 1 oz covers 100+ square inches.
90% Time & Labor Savings: XTC 3D fills in 3D print striations and creates a smooth high gloss finish. The need to post finish is almost eliminated.
Coat any 3D Print Surface: XTC 3D can be applied to both SLA and SLS prints. It works with PLA ABS Laywoo Powder Printed Parts and other rigid media. It also can be used to coat EPS EPDM and urethane foam as well as wood plaster fabric cardboard and paper.
XTC 3D does not contain VOC’s phthalates or phosphates. XTC 3D high performance 3d print coating protective coating for smoothing and finishing 3d printed parts that does not melt plastic;
XTC‑3D fills in 3d print striations and creates a smooth high gloss finish. The need to post finish is almost eliminated;
XTC‑3D can be applied to both SLA and SLS prints. It works with PLA ABS Laywoo Powder Printed Parts and other rigid media such as EPS EPDM and urethane foam as well as wood plaster fabric cardboard and paper;
Two liquids are mixed together and brushed onto any 3d print fabric wood and more. Coating self levels and wets out uniformly without leaving brush strokes;
1 oz covers 100+ square inches. XTC‑3D can be mixed with metal powders SO Strong tints and Ignite or UVO pigments making adding colors and metal effects easy.


Manufacturer: Smooth On;
Model: ;
MPN: 5163569621;
Part Number: 5163569621;
UPC: 715875045000;
Color: ;
Brand: Smooth On;
Department: ;
Size: 6.4 Oz;
Warranty: ;
Label: Smooth On;