XTC 3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC 3D® cures to a hard impact resistant coating that can be sanded primed and painted. Adding colors and metal effects is easy. Inexpensive to Use 1 oz covers 100+ square inches. 90% Time & Labor Savings: XTC 3D® fills in 3D print striations and creates a smooth high gloss finish. The need to post finish is almost eliminated. Coat any 3D Print Surface XTC 3D® can be applied to both SLA and SLS prints. It works with PLA ABS Laywoo Powder Printed Parts and other rigid media. It also can be used to coat EPS EPDM and urethane foam as well as wood plaster fabric cardboard and paper. XTC 3D® does not contain VOC’s phthalates or phosphates. Adult Supervision Required. Keep Out of the Reach of Children. Epoxy Coating for 3D Printed ObjectsSmooths 3D Printed ObjectsCompatible with SLA and SLS prints.It works with PLA ABS Laywoo Powder Printed Parts and other rigid media. It also can be used to coat EPS EPDM and urethane foam as well as wood plaster fabric cardboard and paper. Manufacturer: Smooth On Inc.; Model: ; MPN: 43219 75528; Part Number: 43219 75528; UPC: 751635696419; Color: ; Brand: Smooth On; Department: ; Size: ; Warranty: ; Label: Smooth On Inc.;